komplex dead midi interface not working
#1
Komplex 
Anybody have any ideas on getting the midi interface to work?
no midi transmit or receive at the present time. help with the issue would be appreciated,
thanks Regards to all. j
Reply
#2
(09-29-2022, 06:43 PM)jppn6 Wrote: Anybody have any ideas on getting the midi interface to work?
no midi transmit or receive at the present time. help with the issue would be appreciated,
thanks Regards to all. j


Hello,

Maybe you can give us some more details about your issue so we ca understand more of the problem; did it stopped to work on day to other, or is the first time you try to set the Midi? From what is receiving the Komplex Midi, and to what you want to send it?



First of all to receive the Midi clock be sure to be patched right too; taking the Midi signal from "MIDI CLK" to the "CLK IN" of each track you need.


While for sending out the Midi I would check that the highlighted setting in the image are set good for your purpose.


.pdf   KOMPLEX_SEQUENCER_MODEMENU-V2.pdf (Size: 1.66 MB / Downloads: 6)


Hope we find the issue and is not an electronic component that need to be repaired :)
Reply
#3
Komplex 
(09-30-2022, 09:10 AM)9bar Wrote:
(09-29-2022, 06:43 PM)jppn6 Wrote: setting the komplex as my master to send midi clock/note values is what I'm trying to do. My sequencer in not sending or receiving midi info regardless of the settings in the mode menu etc. Christian was suggesting having to reflash the Midi chip on the unit. Not sure how to go about that but thought I would ask to see if anyone else is having the same problem. otherwise the sequencer seems to be fine as far as the cv modes.  


Hello,

Maybe you can give us some more details about your issue so we ca understand more of the problem; did it stopped to work on day to other, or is the first time you try to set the Midi? From what is receiving the Komplex Midi, and to what you want to send it?



First of all to receive the Midi clock be sure to be patched right too; taking the Midi signal from "MIDI CLK" to the "CLK IN" of each track you need.


While for sending out the Midi I would check that the highlighted setting in the image are set good for your purpose.




Hope we find the issue and is not an electronic component that need to be repaired :)
Reply
#4
Always good to ask if there is other customers with the same issue :)

Actually as Christian told you is probably some chip problem;  before of going any step further with the repair at Koma place we advice to try update; and see if the problem is solved.

Maybe you have some luck and don't have to ship it and be some weeks without your sequencer :)
Reply
#5
I also will have no new information until, I hear it from someone else first.

I used to have alot more information that i recieved but now , all the new information I receive comes from other sources.
Reply




Users browsing this thread: 1 Guest(s)