https://community.koma-elektronik.com/ Sat, 11 Apr 2026 19:48:20 +0000 MyBB https://community.koma-elektronik.com/thread-487.html Tue, 10 Feb 2026 14:13:50 +0100 cberg]]> https://community.koma-elektronik.com/thread-487.html
I got these instructions from Christian at Koma with the permission to share them on this forum.


Boot into the Testsoftware
• To boot into the Testsoftware hold the following buttons while powering the machine:
• STEP - GLIDE - SSP - GATE
• This will bring you to the "Color Setting Menu" (check the manual if you're interested in changing your colors)
But there is a hidden division calibration too! To enter the correct menu for calibrating your divisions press and hold MODE, then press the first step button (step 1) on all four sequencers. This will bring up the "light show" that we use for testing LEDs. Now press and hold MODE and press step 6 on all four sequencers. Now you're in the Division calibration mode for each sequencer. To set them do the following:

1. Turn the `Divisions` knob to counter-clockwise, until it can't move anymore (to the :32 division).
2. Press the left most `Step` button (Step 1). The LED of the slider above should light up / move to that position.
3. Turn the `Divisions` knob one position further clock-wise. Press the `Step` button to right of the last one that you clicked (now Step 2). The LED of the slider above should light up. (This saves the position of the knob.)
4. Repeat steps 3 until all the knob doesn't move anymore. (You are doing it right, if the LEDs light up from left to right.)
5. Press the `One-Shot Mode` button of the sequencer you just calibrated to save the configuration to the EEPROM, so it is saved after the unit has been turned off. Now all the LEDs in the row should light up. Wait until only one LED lights up again.
6. Move the `Divisions` knob. The LEDs should now move with the position of that knob. Check if every position of the knob has one LED light up. If not, repeat steps 1 to 5.

You need to repeat this for every sequencer (sorry). And then your divisions should work again. Sorry for the hassle. But really it doesn't take very long and will make your Divisions more stable than ever before.


--

that's it - hopefully this thread can help you if you get stuck like me :)
best christoffer]]>
I got these instructions from Christian at Koma with the permission to share them on this forum.


Boot into the Testsoftware
• To boot into the Testsoftware hold the following buttons while powering the machine:
• STEP - GLIDE - SSP - GATE
• This will bring you to the "Color Setting Menu" (check the manual if you're interested in changing your colors)
But there is a hidden division calibration too! To enter the correct menu for calibrating your divisions press and hold MODE, then press the first step button (step 1) on all four sequencers. This will bring up the "light show" that we use for testing LEDs. Now press and hold MODE and press step 6 on all four sequencers. Now you're in the Division calibration mode for each sequencer. To set them do the following:

1. Turn the `Divisions` knob to counter-clockwise, until it can't move anymore (to the :32 division).
2. Press the left most `Step` button (Step 1). The LED of the slider above should light up / move to that position.
3. Turn the `Divisions` knob one position further clock-wise. Press the `Step` button to right of the last one that you clicked (now Step 2). The LED of the slider above should light up. (This saves the position of the knob.)
4. Repeat steps 3 until all the knob doesn't move anymore. (You are doing it right, if the LEDs light up from left to right.)
5. Press the `One-Shot Mode` button of the sequencer you just calibrated to save the configuration to the EEPROM, so it is saved after the unit has been turned off. Now all the LEDs in the row should light up. Wait until only one LED lights up again.
6. Move the `Divisions` knob. The LEDs should now move with the position of that knob. Check if every position of the knob has one LED light up. If not, repeat steps 1 to 5.

You need to repeat this for every sequencer (sorry). And then your divisions should work again. Sorry for the hassle. But really it doesn't take very long and will make your Divisions more stable than ever before.


--

that's it - hopefully this thread can help you if you get stuck like me :)
best christoffer]]> https://community.koma-elektronik.com/thread-486.html Tue, 03 Feb 2026 16:56:06 +0100 steveman]]> https://community.koma-elektronik.com/thread-486.html I hope I've just blown a fuse on my Strom PSU. PSU was indicating green (OK) before the issue. After swapping 2 modules it came on briefly then shut down. Now shut down completely with nothing connected. 
I was going to order the replacements from you but was shocked by the 21 Euro shipping fee to the UK. Can I get the same fuse in the UK?
If so what is the specification? Can I get the manual as well as it's not on the website.]]> I hope I've just blown a fuse on my Strom PSU. PSU was indicating green (OK) before the issue. After swapping 2 modules it came on briefly then shut down. Now shut down completely with nothing connected. 
I was going to order the replacements from you but was shocked by the 21 Euro shipping fee to the UK. Can I get the same fuse in the UK?
If so what is the specification? Can I get the manual as well as it's not on the website.]]> https://community.koma-elektronik.com/thread-485.html Fri, 23 Jan 2026 22:46:04 +0100 alphatronic]]> https://community.koma-elektronik.com/thread-485.html i need the old Komplex FW 1.3
does anyone still having the old files.thanks]]> i need the old Komplex FW 1.3
does anyone still having the old files.thanks]]> https://community.koma-elektronik.com/thread-484.html Tue, 20 Jan 2026 18:23:59 +0100 riccardo]]> https://community.koma-elektronik.com/thread-484.html https://community.koma-elektronik.com/thread-479.html Thu, 11 Dec 2025 00:33:41 +0100 Scarab]]> https://community.koma-elektronik.com/thread-479.html
I'm concerned this is a major defect in my unit.  Does anyone have any suggestions?  My unit is #391, one of the newer batch.]]>
I'm concerned this is a major defect in my unit.  Does anyone have any suggestions?  My unit is #391, one of the newer batch.]]> https://community.koma-elektronik.com/thread-476.html Tue, 02 Dec 2025 00:39:40 +0100 clubsndwch]]> https://community.koma-elektronik.com/thread-476.html
https://koma-elektronik.com/new/product/...orkshop-2/

I'm so intrigued and wish I could have participated!Do any of you have any online resources/schematics/etc related to projects like this you'd be willingto share?]]>
https://koma-elektronik.com/new/product/...orkshop-2/

I'm so intrigued and wish I could have participated!Do any of you have any online resources/schematics/etc related to projects like this you'd be willingto share?]]> https://community.koma-elektronik.com/thread-473.html Wed, 12 Nov 2025 06:00:19 +0100 Scarab]]> https://community.koma-elektronik.com/thread-473.html
I have on of the new MIDI-transposing Komplexes  if that makes a difference. 

I'm only sending clock from Logic to Sequencer A in this case, so I have no idea why B is also sending CV to a second sequencer when it's only patched to A. 

Any help?

I tried resetting the Komplex and this didn't fix it.]]>
I have on of the new MIDI-transposing Komplexes  if that makes a difference. 

I'm only sending clock from Logic to Sequencer A in this case, so I have no idea why B is also sending CV to a second sequencer when it's only patched to A. 

Any help?

I tried resetting the Komplex and this didn't fix it.]]> https://community.koma-elektronik.com/thread-455.html Wed, 01 Oct 2025 19:39:32 +0200 teeterr]]> https://community.koma-elektronik.com/thread-455.html
does the Chromaplane tuning website work for you ok on a smartphone? It used to work on mine, but now it has stopped--no sound comes out. I am on an iPhone 15, iOS 18.6. Can live without it but just wondering, thanks!]]>
does the Chromaplane tuning website work for you ok on a smartphone? It used to work on mine, but now it has stopped--no sound comes out. I am on an iPhone 15, iOS 18.6. Can live without it but just wondering, thanks!]]> https://community.koma-elektronik.com/thread-453.html Tue, 12 Aug 2025 11:36:32 +0200 ManicModular]]> https://community.koma-elektronik.com/thread-453.html Hope you enjoy.

]]> Hope you enjoy.

]]> https://community.koma-elektronik.com/thread-452.html Fri, 27 Jun 2025 17:14:52 +0200 nystada]]> https://community.koma-elektronik.com/thread-452.html Since a few days my FM radius is dead for most of the time.
Sometimes it works again, but when I restart my rack next day it’s dead again.

Ive tried several power cablws. PSU is far from beeing overloaded.

Any idea what to check next?

Thanks]]> Since a few days my FM radius is dead for most of the time.
Sometimes it works again, but when I restart my rack next day it’s dead again.

Ive tried several power cablws. PSU is far from beeing overloaded.

Any idea what to check next?

Thanks]]> https://community.koma-elektronik.com/thread-450.html Thu, 17 Apr 2025 22:33:15 +0200 SaBr34]]> https://community.koma-elektronik.com/thread-450.html
I'm wondering what the current status is on pre-orders for the second production run of the Chromaplane? Will they hit the store and be available for regular purchase or is it another limited run offered to early purchasers?

Thanks]]>
I'm wondering what the current status is on pre-orders for the second production run of the Chromaplane? Will they hit the store and be available for regular purchase or is it another limited run offered to early purchasers?

Thanks]]> https://community.koma-elektronik.com/thread-449.html Thu, 17 Apr 2025 17:42:45 +0200 hatmansaxplayer]]> https://community.koma-elektronik.com/thread-449.html
Anyway, one thing I'm wondering about is that when I plug the Chromaplane into my mixer from the delay out, without either pickup plugged in, I can hear all the oscillators playing at once, faintly, but there's definitely a hum. I can hear it at even the slightest volume levels, and it of course goes up with an increase in volume. I tried several cables, and I tried two mixers, my Soundcraft, and the Field Kit mixer as well. I also moved the Chromaplane around on my desk in case something was interfering. But no change. 

I can hear it from the Filter Out as well, but not from the Env out. 

I tried plugging in headphones instead, and I couldn't hear the sound then, but that might just be due to the headphones not having any additional amplification. 

Any ideas what might be the culprit? Or is this the intended functionality?]]>
Anyway, one thing I'm wondering about is that when I plug the Chromaplane into my mixer from the delay out, without either pickup plugged in, I can hear all the oscillators playing at once, faintly, but there's definitely a hum. I can hear it at even the slightest volume levels, and it of course goes up with an increase in volume. I tried several cables, and I tried two mixers, my Soundcraft, and the Field Kit mixer as well. I also moved the Chromaplane around on my desk in case something was interfering. But no change. 

I can hear it from the Filter Out as well, but not from the Env out. 

I tried plugging in headphones instead, and I couldn't hear the sound then, but that might just be due to the headphones not having any additional amplification. 

Any ideas what might be the culprit? Or is this the intended functionality?]]> https://community.koma-elektronik.com/thread-448.html Sat, 29 Mar 2025 18:47:15 +0100 glenoliff]]> https://community.koma-elektronik.com/thread-448.html https://community.koma-elektronik.com/thread-447.html Fri, 28 Mar 2025 18:14:27 +0100 Sandy303]]> https://community.koma-elektronik.com/thread-447.html Got my field kit a couple of weeks ago and it all seemed fine. I got the expansion kit today, plugged the speaker in and nothing. The speaker itself is working, I've tested it with other things.
Now looking at having to return the field kit, but if this is going to be a recurring thing then I would be as well getting my money back.]]> Got my field kit a couple of weeks ago and it all seemed fine. I got the expansion kit today, plugged the speaker in and nothing. The speaker itself is working, I've tested it with other things.
Now looking at having to return the field kit, but if this is going to be a recurring thing then I would be as well getting my money back.]]> https://community.koma-elektronik.com/thread-446.html Sun, 02 Mar 2025 22:04:17 +0100 Scarab]]> https://community.koma-elektronik.com/thread-446.html
I have set the output ranges from 5v and 9v and still can't get it to work.

I'd love some guidance.]]>
I have set the output ranges from 5v and 9v and still can't get it to work.

I'd love some guidance.]]>