[Kubiak21]

Hi All,

I am trying to chain the 4 sequencers together to achieve a 64 step sequence.  I am using Logic to send MIDI clock.  MIDI clock is sent to the first sequencer and then patched down the chain so they are all synced.  All four sequencers are in one-shot mode and are triggered by EOS->Start Slither io. 

The problem is:  there is a slight delay from one sequencer to the next however, meaning that the 64 step cycle does not align to project, with each 16 steps being either a bit behind or ahead of the tempo.  

I have experimented with both lit and unlit for EOS mode and this doesn't correct it. 

I hope I have explained this clearly; am I missing something, or is this a Logic-Komplex MIDI clock issue?

Alright, MIDI clock woes, sounds like a rhythmic nightmare! Ever feel like you're chasing your own tail? Sequencing stuff can be trickier than herding cats, especially when timing is paramount. My first thought is always latency, but you seem to have considered that. Remember that time I was trying to sync up audio tracks for a short film and the drift was driving me crazy? I had to manually nudge each clip, a process as tedious as trying to get good at Slither io while avoiding those massive snakes. Eventually, I just re-recorded everything with a click track and solved. I hope you find a solution.