[noahharold]

Hi All,

I am trying to chain the 4 sequencers together to achieve a 64 step sequence.  I am using Logic to send MIDI clock.  MIDI clock is sent to the first sequencer and then patched down the chain so they are all synced.  All four sequencers are in one-shot mode and are triggered by EOS->Start ->rice purity test

The problem is:  there is a slight delay from one sequencer to the next however, meaning that the 64 step cycle does not align to project, with each 16 steps being either a bit behind or ahead of the tempo.  

I have experimented with both lit and unlit for EOS mode and this doesn't correct it. 

I hope I have explained this clearly; am I missing something, or is this a Logic-Komplex MIDI clock issue?

It sounds like you're facing a common challenge with chaining sequencers and MIDI clock synchronization. One thing to consider is the latency introduced by each sequencer in the chain; even slight delays can add up. Have you tried adjusting the MIDI clock settings in Logic or using a dedicated MIDI splitter to ensure a more stable signal? Sometimes, experimenting with the clock resolution or using a different clock source can also help improve synchronization. Good luck!