08-18-2025, 07:49 AM
(This post was last modified: 08-19-2025, 08:50 AM by CalvinMooney.)
Drive all sequencers from the master MIDI clock in loop mode, and use Reset pulses to line them up every 64 steps.
Instead of EOS chaining, use a clock divider (÷16) from Logic to “select” which sequencer should be active, so they all run in sync but only one outputs at a time.
Instead of EOS chaining, use a clock divider (÷16) from Logic to “select” which sequencer should be active, so they all run in sync but only one outputs at a time.