So Koma and Christian came thru with a solution. The answer to the problem with my Komplex only putting out Midi info from only seq A/B was to reflash the MIDI eprom with a new MIDI 3.2 FW. After doing this, the Komplex returned to normal behavior. All seq now output Midi as normal. Yay!! thank you Christian!
So Koma and Christian came thru with a solution. The answer to the problem with my Komplex only putting out Midi info from only seq A/B was to reflash the MIDI eprom with a new MIDI 3.2 FW. After doing this, the Komplex returned to normal behavior. All seq now output Midi as normal. Yay!! thank you Christian!
(04-19-2025, 12:47 AM)innaspace Wrote:(02-07-2025, 05:09 AM)jppn6 Wrote: Is any one else having issues with this FW3.1 update like I am? My Komplex sequencer is suffering from division/note rate knobs not working. As in the sequencers running at a 32 note value speed rate only and division knobs not changing the rate(s). Also sequencers C/D not outputting info/data while running. Settings on all sequencer Midi Mode are identical on all four, yet A/B output data while C/D do not. All of this occurred after the FW update from 2.3 to FW 3.1. Any ideas/suggestions would be appreciated in getting it back to work. regards and Thanks jp
Hi jp. I've just updated to 3.1 from fw 2.0 and can confirm that my unit is exhibiting the exact same behavior. Ill be sure to update this post if i find a solution and if you could kindly do the same, I'd greatly appreciate it.
Thanks
So Koma and Christian came thru with a solution. The answer to the problem with my Komplex only putting out Midi info from only seq A/B was to reflash the MIDI eprom with a new MIDI 3.2 FW. After doing this, the Komplex returned to normal behavior. All seq now output Midi as normal. Yay!! thank you Christian!